5 DIY Bathroom Jobs CT1 is Perfect For

CT1 sealant and adhesive is an incredibly versatile product that can be used for a number of DIY applications in any room of the home. But, due to its unique flexibility and ability to work well in wet conditions, it’s an excellent choice for any bathroom DIY jobs. Here are some you may not have thought of before!

  1. Repair a leaky shower head

Leaking shower heads quickly waste a lot of water. Plus, they can lead to a loss in water pressure, and prevent your shower from performing as well as it should. With CT1 sealant and adhesive, you can quickly and effectively seal up any gaps where water is leaking from. Apply with the nozzle or with your finger and push the sealant into the crack or gap. Unlike other sealants, you can test if CT1 has done the job almost immediately, as it needs very little time to cure. So just turn on your shower to check if you’ve successfully repaired the leak.

  1. Seal around the bottom of your toilet

Floors can warp over time and one of the most noticeable things you may have to fix is an unlevel toilet. Levelling a toilet is easy using shims (or you can use washers, or even coins!) but these can leave an unsightly finish to your bathroom. So, use CT1 to seal around the base of your toilet. A thicker bead will bridge the gap and cover the shims discreetly.

  1. Secure your shower screen

 If you want to stop your shower screen from moving or are replacing an old shower screen, then CT1 is a great solution to hold it in place. Simply apply CT1 sealant and adhesive where the screen meets the shower base or bathtub and smooth it down with your finger. If you want a straight, clean line, mark the application area using masking tape before you apply the CT1. Remove the masking tape before the CT1 dries to get a super sleek finish!

  1. Reseal your sink

Bathroom sinks get a lot of wear and tear. Mould and discoloration are common in these heavily used areas, but updating your sink is very simple. Give your sink a fresh look by removing all the old sealant with a utility knife. To get the best finish, make sure you’ve got as much old sealant as you can off, without scratching the ceramic or tiles. Then apply CT1. Unlike other sealants, CT1 doesn’t shrink over time, so this quick fix should last a very, very long time.

  1. Seal around your shower attachments

You may be wary of water getting in behind your shower attachments and doing damage to your walls or tiling. Applying CT1 around your shower valves and attachments will ensure that no water can leak into places it shouldn’t be. Just apply as you would with any other method and leave to cure. With CT1, a small bead is all you need.

Purchase CT1 from our official online partner, ToolStation, today!

" "